How do I install a timer delay switch on an end of run?
I want to install a LTB02-1LZ countdown timer, but there are only two wires - one black and one white, no red. It is an end of run switch, so the white wire is actually the hot wire and the black runs...
View Articletimer switch and GFCI
I bought a 6124H-W electronic timer switch a couple of years ago. I have a circuit that runs from the house to the street with a post light, outlet, and low-voltage transformer feeding some path...
View ArticleSharing a Neutral wire may cause improper operation.
In the troubleshooting it mentions that sharing a neutral wire may cause improper operation, what does this mean? I have a timer wired as seen in the attached image and it does not turn on, the LED...
View ArticleLT113 Tethered Remote not working
I have two Leviton LT113-10W timer switches with tethered remotes and after about a year both remotes are no longer working. Is this a known problem? Is it possible to get replacement switches? thanks...
View ArticleWiring LTB60-1LZ does not work, stops other switch
I have a bathroom with a three-switch panel (left: vanity lights, middle: bathroom fan light, right: bathroom fan). I wanted to install a LTB60-1LZ for the fan so I connected it as follows: -...
View ArticleHow do I install a timer delay switch on an end of run?
I want to install a LTB02-1LZ countdown timer, but there are only two wires - one black and one white, no red. It is an end of run switch, so the white wire is actually the hot wire and the black runs...
View ArticleLTB60-1LZ 3-Way Wiring
I'm trying to wire up this with the corresponding VP0SR-1LZ. The wiring diagrams match up perfectly for the Remote Switch, but the LTB60 is asking for 5 wires and I only have 4 (including the ground)....
View ArticleLTB30 Timer Installation for Bathroom Fan
Hi guys, I purchased a Leviton LTB30 and tried to installed it for my bathroom fan. However I'm confused by my bathroom fan wiring. I'm not sure if this is a 3 way or single pole configuration. This...
View ArticleVPT24-1P makes loud clicking sounds and the light blinks on and off rapidly.
I installed a VPT24-1P and now light is very dim and when I turn it off it blinks rapidly and the switch makes a loud clicking sound. When I leave it on, after a few minutes it will also blink on and...
View ArticleHow to wire LTB60 3 way with load in middle?
I am trying to wire a LTB60 timer switch and a VP0SR remote switch with the load (a bathroom fan) in the middle of the run. I can't find a diagram for that configuration. Can anyone help? The line...
View ArticleVPT24-1P just stopped working
I have been using the timer for over 3 years now. the other day it just stopped working. The screen went blank. You can not even turn the lights on and off manually. can you suggest something?
View Articletimer switch and GFCI
I bought a 6124H-W electronic timer switch a couple of years ago. I have a circuit that runs from the house to the street with a post light, outlet, and low-voltage transformer feeding some path...
View ArticleVPT24-1P
VPT24-1P Replacing a mechanical light timer which connected solely to a hot lead and the load lead (for lighting only). Wired the new timer per diagram - hot box lead to black; box load lead to red;...
View ArticleLTB30 Electronic Timer with 6674-P Dimmer: wiring?
BLUF: The timer only works when the dimmer is turned off. Situation: I have a double-gang box in my bathroom that contains the dimmer (bathroom lights) and timer (bathroom fan) mentioned in the...
View ArticleCan two LTB60-1LZ switches be installed in a 3-Way configuration
Can two LTB60-1LZ switches be installed in a 3-Way configuration, one in each bathroom, to operate a central fan, and if so, what does the wiring diagram look like?
View ArticleVPT24-1PZ, Pro Mode, Sunup/Sundown offset time.
Hi, I installed this timer, and it's working. I have the porch lights come on at 6 am, and off at sunrise, then on at sunset and off at 11 pm. I like it. My question is on what the offset...
View ArticleLTB60 does not function properly. Fan stays on continuously
Have a three device box in the powder room. One for light, one for outlet and one for overhead exhaust fan. Removed the fan device and found two wires; one from hot (black) gang and one to fan....
View ArticleSharing a Neutral wire may cause improper operation.
In the troubleshooting it mentions that sharing a neutral wire may cause improper operation, what does this mean? I have a timer wired as seen in the attached image and it does not turn on, the LED...
View Article