LTB60 does not function properly. Fan stays on continuously
Have a three device box in the powder room. One for light, one for outlet and one for overhead exhaust fan. Removed the fan device and found two wires; one from hot (black) gang and one to fan....
View ArticleWiring LTB60-1LZ does not work, stops other switch
I have a bathroom with a three-switch panel (left: vanity lights, middle: bathroom fan light, right: bathroom fan). I wanted to install a LTB60-1LZ for the fan so I connected it as follows: -...
View ArticleVPT24 issue. stopped working few hours after installation
Hi, I just purchased today a VPT24 switch, installed it, got it working. A friend of mine came to see me and few hours later, went to check the nice job I did.... The switch doesn't have lcd...
View ArticleVPT24-1P makes loud clicking sounds and the light blinks on and off rapidly.
I installed a VPT24-1P and now light is very dim and when I turn it off it blinks rapidly and the switch makes a loud clicking sound. When I leave it on, after a few minutes it will also blink on and...
View ArticleUnable to Switch to Pro Mode
I installed in STD mode and then realized I should have done in PRO to use sun up / sun down. How can I switch to PRO? I tried holding SET and then OVERRIDE and get "del" flashing but no "rst"...
View ArticleVizia timer VPT24-00W
HI people, THought I would give this a shot here... i just bought two leviton vizia VPT24-00W switches. I would like to deter vandals on weekend nights, so I would like my lights to stay on longer on...
View ArticleHow to get into MOdE
When I press set and Override the timer will not go into rst. I DEL flashes and when it stops blinking I let go and the clock comes onto the LCD display. I can't get the timer in PRO mode of...
View ArticleVPT24-1PZ, Pro Mode, Sunup/Sundown offset time.
Hi, I installed this timer, and it's working. I have the porch lights come on at 6 am, and off at sunrise, then on at sunset and off at 11 pm. I like it. My question is on what the offset...
View Articletimer switch and GFCI
I bought a 6124H-W electronic timer switch a couple of years ago. I have a circuit that runs from the house to the street with a post light, outlet, and low-voltage transformer feeding some path...
View ArticleLTB30s in 3-way wiring
Is there a design that shows two LTB30s in parrell used as a 3-way feeding a load. Is there a need to connect the YL/RD wire
View ArticleVPT24 with a Dimmer Switch??
I would like to use a VPT24 to control some incandescent lights that are now on a dimmer switch. But I also want to keep the dimmer function. Obviously, the VT24 does not contain a dimmer. Question:...
View ArticleVPT24-1PZ Stuck on Event 1???
I have 2 events programmed and I can't seem to get Event 2 to stay as the active event; it keeps staying on Event 1?? I followed the instructions but I can't seem to make the light switch to stay on...
View ArticleSharing a Neutral wire may cause improper operation.
In the troubleshooting it mentions that sharing a neutral wire may cause improper operation, what does this mean? I have a timer wired as seen in the attached image and it does not turn on, the LED...
View ArticleProblem when installing VPT24-1P
I am trying to install a Leviton VPT24-1P Digital Timer Switch: Hi I'm trying to install the timer swtich on the right most light switch of a 3-light switch electric box....
View ArticleVPT24-1PZ Light Switch Programable Timer
I recently purchased a programable light switch timer, VPT24-1PZ, to replace the existing light switch that is currently installed.. I tried installing it and the screen would not start up or the light...
View ArticleVPT24-1PZ how to factory reset all setting
So I have problem cuz I tryed to many time clock setting but VPT24 clock goes wrong soon How can I factory reset all setting. or Is this VPT24 is broken???
View ArticleProgrammable Timer Switches (6124H) wired in one of the 3 way switch?
Can Programmable Timer Switches (6124H) wired in one of the 3 way switch? if yes, please provide wiring diagram, thank you. Rtseng
View ArticleVPT24-1P Timer goes into permanent override after end of event
Hello, I programmed one event to turn on the porch lights daily from sundown to 11pm in PRO mode. But the timer automatically jumps to permanent override every night after the lights go off at the...
View Article