LTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleLTB60 does not function properly. Fan stays on continuously
Have a three device box in the powder room. One for light, one for outlet and one for overhead exhaust fan. Removed the fan device and found two wires; one from hot (black) gang and one to fan....
View ArticleHow do I connect a 6230m on a switch leg for a ventilating fan.
I wish to connect a 6230m to a fan circuit with the neutral at the fan motor, is it possible?
View ArticleVPT24-1P Battery Back-up
We've a VPT24-1P controlling our outdoor lights for the past couple of years. Lately, I've noticed that the battery backup doesn't maintain clock settings during a power failure--even a brief one. Is...
View Articleminivolt shutoff timer
Looking for a timer/autoshut off for a gas fireplace to be conected to the minivoltage on/off line, replacing a wall switch. Does Leviton have a product with an internal clock/timer that runs on...
View ArticleLTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleProblem when installing VPT24-1P
I am trying to install a Leviton VPT24-1P Digital Timer Switch: Hi I'm trying to install the timer swtich on the right most light switch of a 3-light switch electric box....
View ArticleVPT24-1PZ, Pro Mode, Sunup/Sundown offset time.
Hi, I installed this timer, and it's working. I have the porch lights come on at 6 am, and off at sunrise, then on at sunset and off at 11 pm. I like it. My question is on what the offset...
View ArticleVPT24 Installation
My existing light switch did not have a neutral connection, but I have tapped into the white (neutral?) wires inside the box. Unfortunately, this has not done the trick as I cannot get the timer to...
View ArticleWiring LTB60-1LZ does not work, stops other switch
I have a bathroom with a three-switch panel (left: vanity lights, middle: bathroom fan light, right: bathroom fan). I wanted to install a LTB60-1LZ for the fan so I connected it as follows: -...
View ArticleVPT24-1P makes loud clicking sounds and the light blinks on and off rapidly.
I installed a VPT24-1P and now light is very dim and when I turn it off it blinks rapidly and the switch makes a loud clicking sound. When I leave it on, after a few minutes it will also blink on and...
View ArticleVPT24-1PZ how to factory reset all setting
So I have problem cuz I tryed to many time clock setting but VPT24 clock goes wrong soon How can I factory reset all setting. or Is this VPT24 is broken???
View Articletimer switch and GFCI
I bought a 6124H-W electronic timer switch a couple of years ago. I have a circuit that runs from the house to the street with a post light, outlet, and low-voltage transformer feeding some path...
View ArticleLTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleHelp installing VPT24-1P Timer switch
THis is what I am seeing inside my box in the wall - A copper ground wire A black wire A red wire on this new unit I see the following green wire - I am pretty certain this connects to the...
View ArticleVPT24-1P
VPT24-1P Replacing a mechanical light timer which connected solely to a hot lead and the load lead (for lighting only). Wired the new timer per diagram - hot box lead to black; box load lead to red;...
View ArticleHow do I install a timer delay switch on an end of run?
I want to install a LTB02-1LZ countdown timer, but there are only two wires - one black and one white, no red. It is an end of run switch, so the white wire is actually the hot wire and the black runs...
View ArticleQuestion about installing the VPT24-1PZ
Hi, I am attempting to install this switch but have run into some problems. The switch is in a panel with two other switches. One is a three way and the other two are single poles (at least I think...
View ArticleI am replacing a single pole switch with a VPT 24
The switch I am replacing has only two black wires going to the switch but there was a white (neutral I believe) wire in the box going to another swicth. I connected the wiring exactly as shown for the...
View Article