LTB60-1LZ 3-Way Wiring
I'm trying to wire up this with the corresponding VP0SR-1LZ. The wiring diagrams match up perfectly for the Remote Switch, but the LTB60 is asking for 5 wires and I only have 4 (including the ground)....
View ArticleCan't figure out how to wire VPT24-1PZ with Matching Remote
I am trying to replace two existing 3-pole switches with a Leviton vizia+ (VPT24-1PZ) along with a Matching Switch Remote (VP0SR-1LZ) but have been unsuccessful. I can get the switch screen to power...
View ArticleHow can I erase all programming on the 6124H timer?
How can I erase all programming on the 6124H timer?
View ArticleProgrammable timer
Does Leviton offer a programmable timer (similar to the VPT24-1PZ) that can be used to control operation of a whole house fan including both high the low speed operation?
View ArticleLTB60 Wiring Question
In the box in the upstairs bathroom there are four bundles of wires. The current switches (both light and fan) each have one hot wire entering them and a then black wire going back into the tied...
View ArticleLTB60 does not function properly. Fan stays on continuously
Have a three device box in the powder room. One for light, one for outlet and one for overhead exhaust fan. Removed the fan device and found two wires; one from hot (black) gang and one to fan....
View Articletimer switch and GFCI
I bought a 6124H-W electronic timer switch a couple of years ago. I have a circuit that runs from the house to the street with a post light, outlet, and low-voltage transformer feeding some path...
View ArticleVPT24-1PZ Astronomical Program not working
Hello, We've purchased a VPT24-1PZ timer to drive the exterior lights on our building. A picture of the box is below. The installation seems correct. When pressing the toggle cover on the timer...
View ArticleVPT24 Installation
My existing light switch did not have a neutral connection, but I have tapped into the white (neutral?) wires inside the box. Unfortunately, this has not done the trick as I cannot get the timer to...
View ArticleVPT24-1P wiring diagram
I'm trying to hook up my VPT24-1P timer on a three way system. the big problem is on both switches already installed i only have three wires. red, white and black. the ground is in the back of the box...
View ArticleProblem when installing VPT24-1P
I am trying to install a Leviton VPT24-1P Digital Timer Switch: Hi I'm trying to install the timer swtich on the right most light switch of a 3-light switch electric box....
View ArticleUnable to Switch to Pro Mode
I installed in STD mode and then realized I should have done in PRO to use sun up / sun down. How can I switch to PRO? I tried holding SET and then OVERRIDE and get "del" flashing but no "rst"...
View ArticleVPT24-1P makes loud clicking sounds and the light blinks on and off rapidly.
I installed a VPT24-1P and now light is very dim and when I turn it off it blinks rapidly and the switch makes a loud clicking sound. When I leave it on, after a few minutes it will also blink on and...
View ArticleLTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleSet timer when going on Vacation
How do i set the timer to go on and off when going on vacation? do i have to turn on "random"?
View ArticleVPT24-1PZ, Pro Mode, Sunup/Sundown offset time.
Hi, I installed this timer, and it's working. I have the porch lights come on at 6 am, and off at sunrise, then on at sunset and off at 11 pm. I like it. My question is on what the offset...
View ArticleSharing a Neutral wire may cause improper operation.
In the troubleshooting it mentions that sharing a neutral wire may cause improper operation, what does this mean? I have a timer wired as seen in the attached image and it does not turn on, the LED...
View ArticleLTBxx switches in 3-way and 4-way wiring configurations
I have a few questions in regards to the LTBxx Series of 5-Button Timer Switches: Can two LTBxx switches be used in a 3-way configuration? (The product specification sheet only shows 3-way use in...
View Article