Help installing VPT24-1P Timer switch
THis is what I am seeing inside my box in the wall - A copper ground wire A black wire A red wire on this new unit I see the following green wire - I am pretty certain this connects to the...
View ArticleVPOSR-1L 4-way help
My goal is to add a LBT02 timer to a hall circuit with three switches. I intend to use a couple of VPOSR-1L switches with the timer. The box with the old 4-way switch has two 2 conductor wires. The...
View ArticleVPT24-1PZ Stuck on Event 1???
I have 2 events programmed and I can't seem to get Event 2 to stay as the active event; it keeps staying on Event 1?? I followed the instructions but I can't seem to make the light switch to stay on...
View ArticleLTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleVPT24-1P Battery Back-up
We've a VPT24-1P controlling our outdoor lights for the past couple of years. Lately, I've noticed that the battery backup doesn't maintain clock settings during a power failure--even a brief one. Is...
View ArticleVPT24-1PZ how to factory reset all setting
So I have problem cuz I tryed to many time clock setting but VPT24 clock goes wrong soon How can I factory reset all setting. or Is this VPT24 is broken???
View ArticleLTB30 Timer Installation for Bathroom Fan
Hi guys, I purchased a Leviton LTB30 and tried to installed it for my bathroom fan. However I'm confused by my bathroom fan wiring. I'm not sure if this is a 3 way or single pole configuration. This...
View ArticleVPT24-1P makes loud clicking sounds and the light blinks on and off rapidly.
I installed a VPT24-1P and now light is very dim and when I turn it off it blinks rapidly and the switch makes a loud clicking sound. When I leave it on, after a few minutes it will also blink on and...
View ArticleHelp installing VPT24-1P Timer switch
THis is what I am seeing inside my box in the wall - A copper ground wire A black wire A red wire on this new unit I see the following green wire - I am pretty certain this connects to the...
View ArticleVPT24-1PZ, Pro Mode, Sunup/Sundown offset time.
Hi, I installed this timer, and it's working. I have the porch lights come on at 6 am, and off at sunrise, then on at sunset and off at 11 pm. I like it. My question is on what the offset...
View ArticleLTB30-1LZ - 3-way Wiring with Vizia + Matching Remote switch (w/LED) ISSUES
Hi, I just install a LTB30-1LZ with the 3-way wiring with Vizia + Matching Remote switch (Step 4c in the instruction sheet) but I have a issue. The Timer work and my lightswitch also work. I only...
View ArticleProblem when installing VPT24-1P
I am trying to install a Leviton VPT24-1P Digital Timer Switch: Hi I'm trying to install the timer swtich on the right most light switch of a 3-light switch electric box....
View ArticleQuestion about installing the VPT24-1PZ
Hi, I am attempting to install this switch but have run into some problems. The switch is in a panel with two other switches. One is a three way and the other two are single poles (at least I think...
View ArticleVizia timer VPT24-00W
HI people, THought I would give this a shot here... i just bought two leviton vizia VPT24-00W switches. I would like to deter vandals on weekend nights, so I would like my lights to stay on longer on...
View ArticleProblems with Leviton VPT24
i just had a new Leviton vpt24 installed, but for some reason it isnt controlling my light that i hooked it up to. Also, the backlight wont illuminate. Any ideas?
View ArticleVPT24-1P
VPT24-1P Replacing a mechanical light timer which connected solely to a hot lead and the load lead (for lighting only). Wired the new timer per diagram - hot box lead to black; box load lead to red;...
View Articlevpt24-1p installation, power from light
What is the wiring sequence when power is coming from the light. I have a 14/2 wire coming into the swicth box. the white wire coming into the switch box shows power. My timer has a black line wire, a...
View ArticleVPT24 as a 3-way replacement
I am trying to use the VPT24-1P to replace an existing 3-way switch. My existing switch, and the mate, are both 3-way toggle switches. They have a Red, Black, Green and White connected to them, with...
View ArticleProgramming the VPT24-1P
I have successfully installed & programmed my VPT24-1P, in PRO mode for automatic turn on at sundown and turnoff at sunup, but the "temporary override when flashing" is flashing. Why and what does...
View ArticleQuestion on LTB60-1LZ Wiring
Hi: I am trying to install a LTB60-1LZ countdown timer into a 4 gang box. The box is in a bathroom and near a GFCI outlet. The switch I am replacing is a 2 wire, three speed motor control for a...
View Article